Arctic Onzen User Manual

Onzen Technical GuideOnzen + Sea Salt = Natural Salt Water care made easy.

9STEP 11If you see bubbles, sanitizer is being produced. Leave it to produce for the next few hours and make sure it does not shut off.If you do not s

10FAQs1) How do I know if the Onzen system is working? Conduct a “smoke test” (pg 8). This procedure activates the Onzen System while de-activating

Onzen Technical Support Line: 1-780-789-2646or E-mail: [email protected]

What is Onzen? ...Pg 2Onzen W

Onzen is an all-natural, salt-water soening and maintenance system.What does it do? • Soens water • Claries water •

STEP 1Fill your spa through the lter intake as shown. If you have sedi-ment or high mineral content a “carbon lled pre-lter”, as pic-tured, can hel

Onzen Start - Up Guide4STEP 7Repeat “STEP 5” and “STEP 6”. On a 7’ spa, this is the nal pound of salt. After testing and adjusting alkalin-ity and pH

STEP 10Exit the “low level setting” menu by repeatedly pushing the lter button until the screen resets.5STEP 12You should have sanitizer readings wit

Using Sodium Test StripsSTEP 1Take a sample of water from the spa in a small cup (about 1” full)6STEP 2Place the lower end of the strip into the water

7

STEP 1Turn the temperature below your actual temperature by 2 degrees. Conducting a “Smoke” TestHow to Test if Sanitizer is being Produced(ONZEN SALT